SVMC72150 V1

It’s a special design for QS brushless motor controller for conversion kits, which can match with QS hub motor rated power 3000W-4000W. To match with another motor brand, some parameters should be self-testing.

Key Features

1) Cost-effective.
2) Could match with almost any brushless motor.
3) Programmable.
4) Sine wave without noise, silence during the usage.

Product Information

SVMC72150 V1 Controller

Notes

1. 0-5v e-brake function has been updated.
   Old: it should be pressing the brake switch then can achieve 0-5v e-brake function.
   Update:  0-5v e-brake function could be achieved by without pressing the brake switch.
2. SVMC 60A model, only support classic function.
3. There is no warranty service for unlock type controller (higher amps).
4. CA function is no longer supported.
5. Make sure all the connection is correct before power on.
6. The controller can communicate with the phone app.

P.S.: Normal type, does not match with TFT speedometer.

Drawing of Controller    

SVMC Normal Size: 247mm*146mm*62mm
SVMCxx060 Size: 215mm*146mm*62mm
SVMC96120 Size: 283mm*147mm*62mm

Sabvoton Controller Software Interface

SVMC Series Wiring Diagram

Wire Connection

0-5V E-Brake Pin Definition

• Red: Brake +5v
• Brown: Brake signal
• Black: Brake negative

3-Speed Pin Definition

• Pink: high speed
• Black: GND
• Transparent: Low speed

High Brake Pin Definition

• Purple: High brake

Hall Pin Definition

• Red: Hall +5v
• Yellow-white: Temp sensor
• Black: Hall negative
• Yellow: Hall signal (U)
• Blue: Hall signal (W)
• Green: Hall signal (V)

Ignition Definition

• Orange: Ignition

Hall Speedometer Definition

• Dark blue: Hall speedometer

Bluetooth Adapter