8000W 273 V3 Hub Motor

8000W 273 V3 Hub Motor

273 E-Car wheel hub motor could be used for electric tricycle, light car.
273 motor means the diameter of iron ring/hoop is 273mm, for all 273 motor, we also has 13inch, 14inch, 16inch, 17inch 273 e-scooter hub motor.
273 spoke hub motor, 13inch, 14inch, 16inch, 17inch 273 single shaft hub motor, 273 E-car Hub motor etc., the configuration & performance is the same as 13inch 273 Hub Motor.

Key Features

1) Simplify to make an electric-car. Gearbox, transmission shaft, clutch is no need. Which save space.
2) It could be installed in wheels, and easy to be hybrid car.
3) Easily to make 4-wheel drive, which could spot turn.
4) Support regenerative braking.
5) High efficiency: 85~92%

Product Information

QSMOTOR 8000W 273 V3 Electric Car Single Shaft In-Wheel Hub Motor

Specification 

• Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor with Hall Sensor
• Brand: QS Motor, QSMOTOR
• Motor Design: Single axle without rim
• Matched Wheel: ≥14inch Car Wheel, PCD customizable, CB ≥60mm (PCD 5x112mm, CB60mm as default)
• Stator: Aluminum Core
• Rated Power: 8000W (19000kW peak in few seconds)
• Rated Voltage: 96/72/48V
• Speed:1200RPM/930RPM/627RPM no load, approx. 120km/h@96V 95km/h@72V 67km/h@48V
• kV: 12.5kV (120KPH@96V as default)
• Max Torque: approx. 350N.m
• Max Efficiency: approx. 88%
• Continuous Battery Current: 132 A (96V) 120 A (72V) 80A (48V)
• Peak Battery Current: 180A (96V) 200-250A (72V) 250A (48V)
• Suggest Peak Phase Current: 591A
• Thermic Probe: KTY83/122 (as default, optional)
• Working Temperature: 70-120℃, peak 150 ℃
• Brake type: Car Disc brake, cover 1: PCD 3x80mm, cover 2: 4×114.3mm, M12 (as default)
• Dual Hall Set with waterproof connectors
• 16mm² Cross Section of Phase Wire (not include insulation layer)
• Hall Sensor Phasing angle: 120-degree
• Waterproof Grade: IP65
• Color: Black
• N.W./G.W.: approx. 23.0/24.7kg (TBD)
• Package Dimension: 43cmx43cmx43cm/piece

Cover 1: Disc Brake PCD 3x80mm, M8

Cover 2: Disc Brake PCD 4×114.3mm, M12

Drawing

Cover 1

Cover 2