5000W 260 V4 Hub Motor Kit

5000W Motor + SVMC72200 + CT-22 Display + 3-Speed Switch Throttle + DC-DC Converter

Description

QS 12×5.0inch 5000W motor kit could be used for Electric Scooter, which could be 72V 100KPH.
e.g., Electric Scooter
Weight, approx. 120kg+80 kg
Speed: Peak 100KPH
Climbing slope: 15 degree@200kg
Tire: 165/55-12
Battery: 72V42Ah

The kit includes

1pcs QSMOTOR 12×5.0inch 5000W 260 V4 Electric Wheel Hub Motor, Dual Shaft/Single Shaft
1pcs SVMC72200 Controller with Bluetooth Adapter
1pcs CT-22 Speedometer
1pcs Throttle with 3-Speed Slide Switch
1pcs DC-DC Converter

Key Features

1) Simplify to make an electric-scooter. Gearbox, transmission shaft, clutch is no need. Which save space.
2) It could be installed in the rear to save more space for battery.
3) Support regenerative braking.
4) High efficiency: 85~92%

Product Information

QSMOTOR 5000W 260 V4 Detachable Wheel Hub Motor

Specification

Motor Type: BLDC Outer Rotor In-Wheel Hub Motor with Hall Sensor
Brand: QS Motor, QSMOTOR
Motor Design: Dual or Single axle with 12inch moped rim detachable (optional)
Rim Size: 12×5.0inch, matched tire: 160/55-12 etc. (no tire)
Magnet Height: 45mm, 16 pole pairs
Stator: Aluminum Core
Rated Power: 5000W
Speed: 72V100KPH, 72V 1185RPM (as default)
Work Voltage range: 48V-96V, will be 72V (as default)
Max Torque approx. 261.0N.m
Thermic Probe: KTY83-122 (as default, optional)
Max Efficiency approx. 88%
Brake type: Disc brake design (as default), PCD3x80mm-M8, CB 58 mm (no disc brake plate as default)
Dual Halls with waterproof connectors
16mm² Phase Wire
Waterproof Grade: IP54
Color: Black

Dual Shaft Motor

Single Shaft Motor

Drawing

Dual Shaft Motor

Single Shaft Motor

SVMC72200 Sine Wave Motor Controller

Sine wave controller, programmable, with regen function
DC Current Limit: 200A
Max. Phase Current: 450A
Protect Phase Current: 550A
Battery Voltage: 24V-72V rated, Max. 95V
Thermic Probe: KTY83-122
Including one controller + USB convertor cable + matched plug
Controller size: 283mm*147mm*62mm
Net weight: 2.8kg
It includes Bluetooth adapter as default
Default function: Hall, Throttle, Electric Lock, High Brake Level, Temp sensor, 0-5v e-brake, three speed Button, Hall speedometer, Reverse, Cruise

Notes

0-5v e-brake function has been updated.
Old: it should be pressing the brake switch then can achieve 0-5v e-brake function.
Update: 0-5v e-brake function could be achieved by without pressing the brake switch.
SVMC 60A model, only support classic function.
There is no warranty service for unlock type controller (higher amps).
CA function is no longer supported.
Make sure all the connection is correct before power on.
The controller can communicate with the phone app.

Drawing of Controller

SVMC Normal Size: 247mmx146mmx62mm
SVMCxx060 Size: 215mmx146mmx62mm
SVMC96120 Size: 283mmx147mmx62mm

SVMC Series Wiring Diagram

SVMC Controller Software Interface

SVMC Series Wiring Diagram

Orange ignition: the wire should be connected to battery positive.

H-brake: If the purple wire connects to 12V, the controller enters brake status, when it disconnects with 12V, the controller quit the brake status.

L- brake: If the Yellow wire connects to 0V (battery negative), the motor stops running.
High brake wire connects with 12V brake wire of hand brake/foot brake; low brake wire connects with ground wire.
High brake and low brake cannot use in the same time.

Reverse: If the white wire connects to 0V (battery negative), the controller enters reverse status, twist the throttle, the motor will spin in back direction. When the white wire disconnects with 0V, the controller quit the reverse status.

Speed Function

3 Speed Mode (button)

When select the 3 speed (button) in the software, use a button (which can be reset by itself) to connect the pink wire and ground wire.
Push it and release, the speed gear will change according as follows： 3-2-1-2-3-2-1-2-3-……
When power on, the controller is in 3 gear mode. (high speed mode)

Speed (switch)

When select the 3 speed (switch) in the software.
Use such switch to realize the 3 speed (switch) mode.

If 3 speed (switch) mode selected,

Connect the pink and ground wire.
Enter high speed mode.
Connect the transparent and ground wire. Enter low speed mode.
Disconnect pink, transparent wire and ground, enter middle speed mode.

0-5V E-Brake Throttle

Use a separate throttle to connect to the terminal above.
Please select the “Ebrake-throttle” mode, When spin the throttle, the controller will enter the e-brake mode, the brake strength will follow the throttle position, the max strength can be set from ”Electric brake phase current” as following.

Motor Temperature Function

The controller support kty83-121 temperature sensor from motor inside. The function can be enabled or disabled from the software.

MQCON controller can be connected with computer by USB cable or connected with phone by Bluetooth, the computer interface is just the same with the phone app interface.
Connect with computer.
Before connected with computer, please install USB drive and volume software provided by the controller manufacturer.

The USB cable should be connected in right way as the following picture.

Hall angle: the most important parameter for MQCON controller.
Different type motor should use different angle in controller.
If use improper angle, the motor may not run with best status.
When the user does not know the “hall angle” in advance, the user should get the parameter by using automatic testing function in the software. if the user knows the parameter in advance, just enter the right angle. For SVMC series controller, if used QS V1 or V2 type motor, the hall angle is about 65. If use QS V3 type, the angle is about 250.