16inch 260 E-Scooter wheel hub motor could be used for electric scooter, electric motorcycle.
There is one type of wheel, 16×3.5inch. (1500W-5000W).
16×3.5inch as default.
E-scooter wheel hub motor, we provide the 10-17inch type.
16inch E-Motorcycle wheel hub motor kit could be used for electric motorcycle.
e.g., Electric Motorcycle
E-motorcycle weight, approx. 100kg+75*2kg
Tire diameter: 120/80-16
Speed: 72V 90km/h @ fully charged
Climbing slope: 15-degree @250kg
Battery: 72V30Ah lithium battery
The kit includes
- 1pcs 16×3.5inch 3000W 260 V1.2 E-Motorcycle Hub Motor
- 1pcs EM100SP 72V Sinusoidal Wave BLDC Motor Controller with CAN-BUS
1) Simplify to make an electric-scooter. Gearbox, transmission shaft, clutch is no need. Which save space.
2) It could be installed in the rear to save more space for battery.
3) Support regenerative braking.
4) High efficiency: 85~92%
QSMOTOR 3000W 260 V1.2 E-Motorcycle Hub Motor
- Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor with Hall Sensor
- Brand: QS Motor, QSMOTOR
- Motor Design: double axle with rim
- Matched Tire: 120/70-16, 110/70-16
- Stator: Steel Core
- Rated Power: 3000W (6000kW peak in few seconds)
- Rated Voltage: 72V
- Speed: 880RPM no load, approx. 90km/h when fully charged
- KV: 11.5kV
- Max Torque: approx. 182N.m
- Max Efficiency: approx. 87.8%
- Continuous Battery Current: 63A (72V)
- Peak Battery Current: 80A, 100A maximum (72V)
- Suggest Peak Phase Current: /A
- Thermal Probe: KTY83/122 (as default, optional)
- Working Temperature: 70-110℃, peak 120 ℃
- Brake type: Disc brake design, PCD3x80mm-M8, CB 58mm (without disc brake plate as default)
- Dropouts: 200mm
- Single Hall Set with waterproof connectors
- 8mm⊃2; Cross Section of Phase Wire (not include insulation layer)
- Hall Sensor Phasing angle: 120-degree
- Waterproof Grade: IP54
- Color: Black
- N.W./G.W.: approx. 23.2kg/25.0kg (TBD)
- Package Dimension: 50.5cmx50.5cmx35cm
16×3.5inch 260 Hub Motor
3000W Hub Motor, 72V 880RPM
EM100SP 72V Sinusoidal Wave BLDC Motor Controller with CAN-BUS
- Sine wave controller, programmable, with regen function
- Rated Current:100A
- Boost Current:130A
- Peak Current:330A
- Flux Weakening Ratio:100~250%
- Net weight: 1650g
- Waterproof IP67
Drawing of Controller