3000W motor kits could be used for Electric Bike, which could be 72V 70KPH.
E-bike weight, approx. 47kg+80kg
Tire diameter: 2.50-17
Speed: 72V 70km/h
Climbing slope: 25°@127kg
Battery: 72V 40h lithium battery
The kit includes
- 1pcs QSMOTOR 3000W 205 V3I/V3TI Electric Spoke Hub Motor with Moped Wheel (17×1.6inch/ 18×1.6inch/19×1.6inch)
- 1pcs 19×1.6inch Front Wheel Rim
- 1pcs Spacer
- 1pcs Sabvoton SVMC72150 Controller
- 1pcs Bluetooth Adapter
1) QS Motor with high quality and service.
2) Sine Wave controller, Bluetooth wireless connection are optional, highest Reliability.
3) Parameter Programmable.
4) Higher Torque & Higher Efficiency.
5) No noisy.
6) Temperature sensor inside and Lower overheating.
7) Regenerative braking.
QSMOTOR 3000W 205 V3I/V3TI Electric Spoke Hub Motor
- Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor with Hall Sensor
- Brand: QS Motor, QSMOTOR
- Motor Design: double axle without rim
- Matched Wheel: 24inch, 26inch E-Bike Wheel, 17inch, 18inch, 19inch moped wheel
- Stator: Aluminum Core
- Rated Power: 3000W (6000W peak in few seconds)
- Rated Voltage: 72V
- Speed: 5T 650rpm@72V/ 4T 820rpm@72V/ 3T 1170rpm@72V
- Max Torque: approx. 181N.m
- Max Efficiency: approx. 91%
- Continuous Battery Current: 44A (72V)
- Peak Battery Current: 100-150A (72V)
- Suggest Peak Phase Current: 240A
- Thermic Probe: KTY83/122 (as default, optional)
- Working Temperature: 70-120℃, peak 150 ℃
- Brake type: Bike Disc brake, PCD6x44mm (as default)
- Drop-outs/Rear Fork Width for installation: 150mm
- 14mm English thread length for single/3-speed freewheel
- 10mm axle flats
- Dual Hall Set with waterproof connectors
- 10mm² Cross Section of Phase Wire (not include insulation layer)
- Hall Sensor Phasing angle: 120-degree
- Waterproof Grade: IP65
- Color: Black
- N.W./G.W.: approx. 12.5/14.0kg (TBD)
- Package Dimension: 34cmx34cmx33cm
Difference Between V3I and V3TI
- V3TI Phase wire exit from thread side, which is easier to mount on bike and more appealing.
- Phase wire of V3I and V3TI change to integrated one instead of standard loose one, which improved from IP54 to IP65.
- V3I and V3TI Add brake spacer as default, which is thinner to avoid scratch phase wire by brake disc.
Moped Rear Wheel
- 1 Cross Pattern Moped Rear Wheel Set
- 36x10G Spoke, black color (Iron with zinc coat)
- QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black
19×1.6inch Front Wheel
- 19x.6inch 2 Cross Pattern Moped Front Wheel Set
- 32x10G Spoke, black color (Iron with zinc coat)
- 32 holes, 110mm dropouts, black
Drawing of Controller
SVMC Series Wiring Diagram