3000W 205 V3I/V3TI Spoke Motor with Wheels Kit I

3000W motor kits could be used for Electric Bike, which could be 72V 70KPH.
E-bike weight, approx. 47kg+80kg
Tire diameter: 2.50-17
Speed: 72V 70km/h
Climbing slope: 25°@127kg
Battery: 72V40h lithium battery

The kit includes

• 1pcs QSMOTOR 3000W 205 V3I/V3TI Electric Spoke Hub Motor with 19×1.6inch Moped Wheel
• 1pcs 19×1.6inch Front Wheel Rim
• 1pcs Spacer
• 1pcs SVMC72150 Controller
• 1pcs Bluetooth Adapter
• 10ml Statorade Ferrofluid
• 1pcs Heat Sink

Key Features 

1) QS Motor with high quality and service.
2) Sine Wave controller, Bluetooth wireless connection are optional, highest reliability.
3) Parameter Programmable.
4) Higher Torque & Higher Efficiency.
5) No noisy.
6) Temperature sensor inside and Lower overheating.
7) Regenerative braking.

Product Information

QSMOTOR 3000W 205 V3I/V3TI Electric Spoke Hub Motor

Specification

• Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor with Hall Sensor
• Brand: QS Motor, QSMOTOR
• Motor Design: double axle without rim
• Matched Wheel: 24inch, 26inch E-Bike Wheel, 17inch, 18inch, 19inch moped wheel
• Stator: Aluminum Core
• Rated Power: 3000W (6000W peak in few seconds)
• Rated Voltage: 72V
• Speed: 650rpm@72V/ 820rpm@72V/ 1170rpm@72V
• Max Torque: approx. 181N.m
• Max Efficiency: approx. 91%
• Continuous Battery Current: 44A (72V)
• Peak Battery Current: 100-150A (72V)
• Suggest Peak Phase Current: 240A
• Thermic Probe: KTY83/122 (as default, optional)
• Working Temperature: 70-120℃, peak 150 ℃
• Brake type: Bike Disc brake, PCD6x44mm (as default)
• Drop-outs/Rear Fork Width for installation: 150mm
• 14mm English thread length for single/3-speed freewheel
• 10mm axle flats
• Dual Hall Set with waterproof connectors
• 10mm² Cross Section of Phase Wire (not include insulation layer)
• Hall Sensor Phasing angle: 120-degree
• Waterproof Grade: IP65
• Color: Black
• N.W./G.W.: approx. 12.5/14.0kg (TBD)
• Package Dimension: 34cmx34cmx33cm

Dimension Drawing

Test Report

Difference Between V3I and V3TI

• V3TI Phase wire exit from thread side, which is easier to mount on bike and more appealing.

• Phase wire of V3I and V3TI change to integrated one instead of standard loose one, which improved from IP54 to IP65.

• V3I and V3TI Add brake spacer as default, which is thinner to avoid scratch phase wire by brake disc.

Spacer

19×1.6inch Moped Rear Wheel

• 19×1.6inch 1 Cross Pattern Moped Rear Wheel Set
• 36x10G Spoke, black color (Iron with zinc coat)
• QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black

19×1.6inch Front Wheel

• 19x.6inch 2 Cross Pattern Moped Front Wheel Set
• 32x10G Spoke, black color (Iron with zinc coat)
• 32 holes, 110mm dropouts, black

SVMC72150 Controller

Bluetooth Adapter

Statorade Ferrofluid

• Cooling e-bike hub motor

Heat Sink