3000W 205 V3/V3I/V3TI Spoke Motor

3000W 205 V3/V3I/V3TI Spoke Motor

It’s QS electric In-Wheel Bicycle Spoke Hub Motor for Conversion Kits, which power range from 500w to 3000w rated, drop-outs 150mm with bicycle disc brake.
Especially suit for electric bicycle, max. speed for 60km/h to 100km/h (suggest max 80kph).

The item includes

• 1pcs QSMOTOR 3000W 205 V3/V3I/V3TI Electric Spoke Hub Motor
• 1pcs 17×1.6/19×1.6inch Wheel Rim
• 36pcs 10G Spokes and Nipples for Lacing Wheel (black spoke as default, sliver optional)
• 1pcs Spacer (optional, when you choose V3I and V3TI, spacer will be included)

Key Features

1) QS Motor with high quality and service.
2) Sine Wave controller, Bluetooth wireless connection are optional, highest reliability.
3) Parameter Programmable.
4) Higher Torque & Higher Efficiency.
5) No noisy.
6) Temperature sensor inside and Lower overheating.
7) Regenerative braking.

Product Information

QSMOTOR 3000W 205 V3/V3I/V3TI Electric Spoke Hub Motor

Specification

• Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor with Hall Sensor
• Brand: QS Motor, QSMOTOR
• Motor Design: double axle without rim
• Matched Wheel: 24inch, 26inch E-Bike Wheel, 17inch, 18inch, 19inch moped wheel
• Stator: Aluminum Core
• Rated Power: 3000W (6000W peak in few seconds)
• Rated Voltage: 72V
• Speed: 820RPM 4T, 650RPM 5T no load
• kV: 9.0kV/KV:12.6
• Max Torque: approx. 181N.m
• Max Efficiency: approx. 91%
• Continuous Battery Current: 44A (72V)
• Peak Battery Current: 100-150A (72V)
• Suggest Peak Phase Current: 240A
• Thermic Probe: KTY83/122 (as default, optional)
• Working Temperature: 70-120℃, peak 150 ℃
• Brake type: Bike Disc brake, PCD6x44mm (as default)
• Drop-outs/Rear Fork Width for installation: 150mm
• 14mm English thread length for single/3-speed freewheel
• 10mm axle flats
• Dual Hall Set with waterproof connectors
• 10mm² Cross Section of Phase Wire (not include insulation layer)
• Hall Sensor Phasing angle: 120-degree
• Waterproof Grade: IP54
• Color: Black
• N.W./G.W.: approx. 12.5/14.0kg (TBD)
• Package Dimension: 34cmx34cmx33cm

Dimension Drawing

Test Report

Main Difference Between V3 V3I and V3TI

• V3TI Phase wire exit from thread side, which is easier to mount on bike and more appealing.

• Phase wire of V3I and V3TI change to integrated one instead of standard loose one, which improved from IP54 to IP65.

• V3I and V3TI Add brake spacer as default, which is thinner to avoid scratch phase wire by brake disc.

 Spacer

17×1.6/19×1.6inch Moped Rear Wheel

• 17×1.6/19×1.6inch 1 Cross Pattern Moped Rear Wheel Set
• 36x10G Spoke, black color (Iron with zinc coat)
• QSMOTOR 3000W 205 Hub Motor, 36 holes, 150mm dropouts, black