3000W 205 V3/V3I/V3TI Spoke Motor Kit III

3000W 205 V3 electric spoke hub Motor kit assembly could be used for high power electric bike, which could be 72V 70KPH.
e.g., high power electric bike
E-bike weight, approx. 47kg+80kg
Tire diameter: 2.50-19
Speed: 72V 70km/h
Climbing slope: 25°@127kg
Battery: 72V 40h lithium battery

Kit 1 includes

• 1pcs QSMOTOR 3000W 205 V3/V3I/V3TI Electric Spoke Hub Motor
• 1pcs Spacer (The spacer will only be included in V3I and V3TI)
• 1pcs Freewheel
• 1set 19×1.6inch Moped Front Wheel and 19×1.6inch Rear Wheel (spoke color, sliver/black, black as default)
• 1pcs Sabvoton SVMC72150 Controller (customized for TFT speedometer)
• 1pcs Bluetooth Adapter
• 1pcs H6 Color Speedometer
• 1pcs Half Twist Throttle
• 1pcs Thumb Throttle
• 1pcs Disc Brake Assembly
• 1pcs DC-DC Converter
• 1pcs PAS Sensor

Kit 2 includes

• 1pcs QSMOTOR 3000W 205 V3/V3I/V3TI Electric Spoke Hub Motor Lacing with 19×1.6inch Wheel Rim
• 1pcs Spacer (The spacer will only be included in V3I and V3TI)
• 1pcs Freewheel
• 1pcs Sabvoton SVMC72150 Controller (customized for TFT speedometer)
• 1pcs Bluetooth Adapter
• 1pcs H6 Color Speedometer
• 1pcs PAS Sensor

Key Features

1) QS Motor with high quality and service.
2) Sine Wave controller, Bluetooth wireless connection are optional, highest Reliability.
3) Parameter Programmable.
4) Higher Torque & Higher Efficiency.
5) No noisy.
6) Temperature sensor inside and Lower overheating.
7) Regenerative braking.

Product Information

QSMOTOR 3000W 205 V3/V3I/V3TI Electric Spoke Hub Motor

Specification

• Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor with Hall Sensor
• Brand: QS Motor, QSMOTOR
• Motor Design: double axle without rim
• Matched Wheel: 24inch, 26inch E-Bike Wheel, 17inch, 18inch, 19inch moped wheel
• Stator: Aluminum Core
• Rated Power: 3000W (6000W peak in few seconds)
• Rated Voltage: 72V
• Speed: 650RPM/825RPM no load
• kV: 9.0KV/11.5KV
• Max Torque: approx. 181N.m
• Max Efficiency: approx. 91%
• Continuous Battery Current: 44A (72V)
• Peak Battery Current: 100-150A (72V)
• Suggest Peak Phase Current: 240A
• Thermic Probe: KTY83/122 (as default, optional)
• Working Temperature: 70-120℃, peak 150 ℃
• Brake type: Bike Disc brake, PCD6x44mm (as default)
• Drop-outs/Rear Fork Width for installation: 150mm
• 14mm English thread length for single/3-speed freewheel
• 10mm axle flats
• Dual Hall Set with waterproof connectors
• 10mm² Cross Section of Phase Wire (not include insulation layer)
• Hall Sensor Phasing angle: 120-degree
• Waterproof Grade: IP54
• Color: Black
• N.W./G.W.: approx. 12.5/14.0kg (TBD)
• Package Dimension: 34cmx34cmx33cm

Dimension Drawing

Test Report

Difference Between V3, V3I and V3TI

• V3TI Phase wire exit from thread side, which is easier to mount on bike and more appealing.

• Phase wire of V3I and V3TI change to integrated one instead of standard loose one, which improved from IP54 to IP65.

• V3I and V3TI Add brake spacer as default, which is thinner to avoid scratch phase wire by brake disc.

Spacer

Freewheel

• Single speed 1/2×3/32x16T, only 16T is available
• Black
• English System Thread
• Suit to QS Spoke Motor (English thread)

19×1.6inch Moped Front Wheel and 19×1.6inch Rear Wheel

19×1.6inch Front Wheel

• 19x.6inch 2 Cross Pattern Moped Front Wheel Set
• 32x10G Spoke, black color (Iron with zinc coat)
• 32 holes, 110mm dropouts, black

19×1.6inch Rear Wheel

• 1 Cross Pattern Moped Rear Wheel Set
• 36x10G Spoke, black color (Iron with zinc coat)
• QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black

SVMC72150 Motor Controller

• Customized for H6 Speedometer
• Sine wave controller, programmable, with regen function
• DC Current Limit: 150A
• Max. Phase Current: 350A
• Protect Phase Current: 450A
• Battery Voltage: 24V-72V rated, Max. 95V
• Including one controller
• Controller size: 247mmx146mmx62mm
• Net weight: 2kg
• Default including Bluetooth adapter
• Default function: Hall, Throttle, Electric brake, High Brake Level, speed switch
• Special functions: Waterproof

TFT H6 Color Speedometer

• 3.2inch color TFT screen
• 48V/60V/72V power supply
• Shutdown leakage current <1Ua
• Supply controller terminal operating current 100mA
• Normal operating temperature of the instrument -20～65°C

Function

• Battery display: 5 segments of power indication, the voltage value of each segment can be set according to customer requirements.
• Speed mode: real-time speed RT SPEED, maximum speed MAX SPEED, average speed AVG SPEED.
• Speed display: display range 00.0. ~ 99.9, unit Km / h km per hour, MPH miles per hour.
• Assist gear position: 0～9 files, of which 0 gear is neutral and no boost, 1～9 corresponds to boost gear, and P is displayed in 6Km push mode.
• Headlight display: displayed when the headlights are on.
• Motor temperature: monitor motor temperature in real time.
• Mileage mode: cumulative mileage ODO, single mileage Trip.
• WH.KM: the controller power consumption, wh/km .
• Motor temperature.
• Regen Ah: Cumulative Ah while controller in regen mode.
• Clock: Built-in battery, user set up.
• Clock: Built-in battery, user set the year, month, day, hour, minute and second.

Half Twist Throttle with 3-Speed toggle Switch

Thumb Throttle for 0-5V Variable Regen Brake

• It could be mounted in left hand.

Disc Brake Assembly

Electric bicycle aluminum hydraulic disc brake system assembly

• Model: 152PYD+BS150
• Including 2pcs 203mm plate, PCD6x44mm, 2mm thickness
• The length of oil of both front and rear can be customized according to your e-bike (900mm for front, 1600mm for rear as default)
• Calipers: double-piston 2x21mm
• Installing Distance of front tire: 74mm (as default) or 51mm
• Installing distance of rear tire: 51mm
• Wiring: Two core wiring
• Materials: Caliper/Lever Cast aluminum, Bracket: Cast aluminum
• Current: 1A (max)

DC-DC Converter

72V to 12V, 10A

PAS Sensor

• Made of steel material, durable and reliable.
• Mount on electric bicycle pedal, easy to install
• 1:1 power assist, make cycling easier and funnier.
• Suitable for most of electric bicycles.