3000W 205 V3 electric spoke hub Motor kit assembly could be used for high power electric bike, which could be 72V 70KPH.
e.g., high power electric bike
E-bike weight, approx. 47kg+80kg
Tire diameter: 2.50-19
Speed: 72V 70km/h
Climbing slope: 25°@127kg
Battery: 72V 40h lithium battery
The kit includes
- 1pcs QSMOTOR 3000W 205 V3/V3I/V3TI Electric Spoke Hub Motor
- 1pcs Spacer
- 1pcs Freewheel
- 1pcs 19×1.6inch Rear Wheel (spoke color, black/silver, black as default)
- 1pcs SVMC72150 Controller (customized for TFT speedometer) with Bluetooth Adapter
- 1pcs UKC TFT Speedometer
- 1set Brake Levers and Throttle
1) QS Motor with high quality and service.
2) Sine Wave controller, Bluetooth wireless connection are optional, highest Reliability.
3) Parameter Programmable.
4) Higher Torque & Higher Efficiency.
5) No noisy.
6) Temperature sensor inside and Lower overheating.
7) Regenerative braking.
QSMOTOR 3000W 205 V3/V3I/V3TI Electric Spoke Hub Motor
- Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor with Hall Sensor
- Brand: QS Motor, QSMOTOR
- Motor Design: double axle without rim
- Matched Wheel: 24inch, 26inch E-Bike Wheel, 17inch, 18inch, 19inch moped wheel
- Stator: Aluminum Core
- Rated Power: 3000W (6000W peak in few seconds)
- Rated Voltage: 72V
- Speed: 650RPM/825RPM no load
- kV: 9.0KV/11.5KV
- Max Torque: approx. 181N.m
- Max Efficiency: approx. 91%
- Continuous Battery Current: 44A (72V)
- Peak Battery Current: 100-150A (72V)
- Suggest Peak Phase Current: 240A
- Thermic Probe: KTY83/122 (as default, optional)
- Working Temperature: 70-120℃, peak 150 ℃
- Brake type: Bike Disc brake, PCD6x44mm (as default)
- Drop-outs/Rear Fork Width for installation: 150mm
- 14mm English thread length for single/3-speed freewheel
- 10mm axle flats
- Dual Hall Set with waterproof connectors
- 10mm² Cross Section of Phase Wire (not include insulation layer)
- Hall Sensor Phasing angle: 120-degree
- Waterproof Grade: IP54
- Color: Black
- N.W./G.W.: approx. 12.5/14.0kg (TBD)
- Package Dimension: 34cmx34cmx33cm
Difference Between V3, V3I and V3TI
- V3TI Phase wire exit from thread side, which is easier to mount on bike and more appealing.
- Phase wire of V3I and V3TI change to integrated one instead of standard loose one, which improved from IP54 to IP65.
- V3I and V3TI Add brake spacer as default, which is thinner to avoid scratch phase wire by brake disc.
Drawing of Spacer
- Single speed 1/2×3/32x16T, only 16T is available
- English System Thread
- Suit to QS Spoke Motor (English thread)
19×1.6inch Rear Wheel
- 1 Cross Pattern Moped Rear Wheel Set
- 36x10G Spoke, black color (Iron with zinc coat)
- QS 3000W 205 50H Hub Motor, 36 holes, 150mm dropouts, black
SVMC72150 Controller with UKC Display Sets
- 1pcs SVMC72150 Controller with TFT Function
- 1pcs UKC Speedometer
- 1pcs Bluetooth Adapter
- 1set Brake Levers and Throttle
- Cheap Cost
- Could match with almost any brushless DC motor
- Sine wave without noise
SVMC72150 Motor Controller
- Customized for UKC Speedometer
- Sine wave controller, programmable, with regen function
- DC Current Limit: 150A
- Max. Phase Current: 350A
- Protect Phase Current: 450A
- Battery Voltage: 24V-72V rated, Max. 95V
- Thermic Probe: KTY83-122
- Including one controller + USB convertor cable + matched plug
- Controller size: 247mmx146mmx62.5mm
- Net weight: 2.5kg
- Default function: Hall, Throttle, Reverse, Electric Lock, High Brake Level, Temp sensor, 0-5v e-brake, three speed switch, Hall speedometer.
Drawing of Controller
Sabvoton Controller Software Interface
- 0-5v e-brake function has been updated.
Old: it should be pressing the brake switch then can achieve 0-5v e-brake function.
Update: 0-5v e-brake function could be achieved by without pressing the brake switch.
- There is no warranty service for unlock type controller (higher amps).
- CA function is no longer supported.
- Make sure all the connection is correct before power on.